Different many Ways to Fix QuickBooks Error Code H202 Intuit QuickBooks Support Phone Number 1-800-875-9516

 Intuit QuickBooks Support Phone Number 1-800-875-9516

How to Fix QuickBooks Error H202 easily

1. Method One: Test Network Connectivity and Calibration

• Check your network connectivity on all computers which are using for QuickBooks
• Select Utilities on the File menu
• Then turn off the complete hosting
• Open Windows and type “This PC” on a particular host computer that is using for QuickBooks
• Ensure that all the networks are visible by double-click on the network options which you can see on the left of Windowpane
• Ping the server name to all workstations using a computer that is used for QuickBooks Host/server
• Open Command Prompt to give the command for all the ping test
• Send command syntax that includes the Computer name
• In the end, Press Enter.

2. Method Two: Access the Network Diagnostic Tool

• At first, Download and install the tool.
• Check the folder where the data file is located.
• Write down the number of IP locations and Web Interfaces.
• If the Firewall Status sector has an Open Ports key, hit the button to enable those ports for QuickBooks.
• Check for the data file connectivity.
• Try to open your company data file.
• If the QuickBooks error H202 still there, try to add the QuickBooks port to the list of differences in the Windows Firewall.

3. Method Three: Add the Server to Your Windows Host File

• In the beginning step, close all your QuickBooks windows 
• On the server, navigate to C:\Windows\System32\Drivers\Etc or C:\Windows\Syswow64\Drivers\Etc 
• When prompted for a software, double-click on the hosts file and then select “Notepad”  
• Manually enter the IP address along with the computer’s name
• After that, enter the computer’s IP address and name for the server
• In the case of a computer, type the server’s IP address and the computer’s name
• Instead of pressing the Spacebar, press the Tab key on your keyboard to separate the computer name and IP address
• Finally, check if QuickBooks Error Code H202 has been repaired by opening it in multi-user mode.

4. Method Four: Create a new folder for your company file

• On the hosting computer, make a new folder.
• Share the folder and set it up. After that, Windows will obtain permission to share the company files.
• Now, copy the QuickBooks Database (QBW) file data to a new folder.
• In the end, open your business file in multi-user mode again.

5. Method Five: Fix hosting to local files

• QuickBooks and hit F2 to open the Product Information screen.
• In the lower-left, below the Local Server Data, Select Hosting to display ‘local files only’.
• Make sure that no other customer policy tries to host the same company file.

6. Method Six: Delete and recreate the .ND file

• Press the Window key and type *.ND then hit Enter
• To delete the previous file, Right-click on the.ND file in the Results Window
• After that, hit on “Delete” in the open.ND file
• Confirm deletion once completed
• Open Windows once again
• Go to All Programs and select QuickBooks then QuickBooks Database Server Manager
• Open the “Scan Folder” tab on the same
• To browse your company file, Click “Add Folder” on the open page
• Choose the desired company file or folder and then hit the Ok button
• To do scanning, click on the “Scan” button
• Once the scanning completed then Click on the Close button.

7. Method Seven: Configure QuickBooks Database Server Manager

• Open the Run window 
• Then type MSC and press Enter button
• Click on the Services icon
• In the list of services, find and select the QuickBooksDBXX
• Then double-click on the service you selected 
• Then choose option Stop that helps you to disable the service
• Then click on the Start option as the Automatic
• Now open QuickBooks and then open the Company File.

8. Method Eight: Repair and Update QuickBooks

• Open Control Panel in your system
• Then go to the Programs and Features or Programs option
• Again, click on the Programs option
• You get a list of Programs, so search for QuickBooks
• Now, right-click on QuickBooks  and click on Uninstall/Change option
• Then choose the Repair option and click on the Next button
• You get few instructions to follow 
• After that, you are done with the repair process
• Now do update the QuickBooks to the latest release
• Open the QuickBooks software
• Then click on the Help menu option
• Select Update QuickBooks
• Get the update and then update it properly
• In the end, restart your computer and start using QuickBooks.

9. Method Nine: Confirm your QuickBooks Services

If the server is running a full version of QuickBooks, you can initiate multi-user hosting mode by following the instructions below:

• In the very first step, open your “QuickBooks” while on the server
• Next, select the File >>> Utilities from the drop-down menu

• After that, select Host multi-user access using the drop-down menu

Follow the procedures below to check the status of QuickbooksDBXX and QBCFMonitorService on the server:

• Activate the Run window
• In the text area, type services.msc followed by pressing the Ok key

• Once done with the above step, choose QuickBooksDBXX
• Check whether the Startup type is Automatic or Manual
• Make sure the Startup type is set to Automatic if it isn’t already
• Check the status of the service and make sure it says it’s up and running

• Select Recovery from the Recovery tab
• Then select Restart the service of all these failures from the drop-down boxes for the first, second, and subsequent failures

• Now press the “Apply” followed by clicking on the “Ok” button
• In the final step for QBCFMonitorService, complete all of the actions listed above.

10. Method Ten: Run the QuickBooks File Doctor Tool 

Intuit’s QuickBooks File Doctor is a common troubleshooting tool for diagnosing and troubleshooting different types of QuickBooks errors including the H-Series of error code H202. To utilize this tool, you must first download it (if not already done so) and run it from Intuit’s official website.

The following are the steps involved in this process:

• To begin, you must first download and install the QuickBooks File Doctor Tool
• Next, go to the QuickBooks tools hub and open the tool following by choosing the company file issues 

• From the drop-down option, select the company file
• If you can’t find the file, go to Browse and search

• When you’re finished, check the box which is next to your file and then click Continue
• The final step is to input the QuickBooks administrator password and then choose “Next”.

It should be mentioned that the scan duration is dependent on the file size, and it might take up to 5 minutes in most circumstances. When the scan is finished, you should open the QuickBooks software and the company file.

11. Method Eleven: Install and Run the QuickBooks Database Server Manager 

• To begin, go to the Windows Start menu on your server
• In the search area, you have to type “Database”
• From the drop-down menu, choose QuickBooks Database Server Manager

• Look for the folder containing company files
• This folder can also be found by using the browse feature
• To begin scanning, press the Start Scan button

• QBDBSM can be used to fix the system firewall settings
• When the scan is finished, press the “Close” button
• You must open QuickBooks on each of the workstations where the problem displays
• Now select File from the File menu
• In the end, switch to multi-user mode by clicking on it.

The QuickBooks H202 problem has been addressed if you may now use QuickBooks in multi-user mode. If the problem remains, move on to the next step.

12 Method Twelve: Configure the System Firewall Settings 

At times, data flow between QuickBooks and the server may be obstructed by your system firewall. In that scenario, you can establish QuickBooks firewall settings to ensure unrestricted communication between QB and the server by following the instructions below.

• In the system firewall’s settings, make or create exceptions
• Change the firewall permissions on the system and then open QuickBooks on all of the PCs

• From the File menu, choose Switch to multi-user mode.

13. Method Thirteen: Resolve network issues using QuickBooks Connection Diagnostic Tool

• The QuickBooks connection diagnostic tool must first be downloaded and installed on the hosting machine
• Next, you have to scan the folder containing the QuickBooks company files 
• After that, write down the IP address that appears when you run the QB connection diagnostic program
• The diagnostic program will next instruct you on how to set the firewall ports
• Perform the connection diagnostic tool’s additional instructions from the prompts
• Finally, on the machine where the H202 issue occurred, try opening QB company files.

14. Method Fourteen: On the Fedora Linux Server, edit the QBGlobalAppConfig.ini file

• To begin, open a Linux Terminal Window and the QBGlobalAppConfig.ini file
• Check the default port range and remove any spaces before and after the equal sign (=)